Quality

Technical Standards

The standards our products are built and tested against.

04.

Chinese national & industry standards

Products are manufactured to GB/T and JB/T standards including GB/T 5023 / IEC 60227 (building wires), GB/T 12706 / IEC 60502 (power cables), GB/T 9330 (control cables) and GB/T 5013 / IEC 60245 (rubber cables).

04.

International & harmonised standards

Export products reference international standards such as IEC, EN 50525 (harmonised flexible cables) and, for special applications, IEC 60702 (mineral insulated), IEC 60092 (marine) and MT 818 (mining).

04.

Fire-performance standards

Flame-retardant and fire-resistant cables are assessed against standards such as GB 31247 (burning behaviour), IEC 60332, IEC 60331 and IEC 61034 (smoke density).

Standards and references

Certificate numbers, standards and validity dates on this site are reproduced from the company’s own documents. The named sources below are the official texts a buyer can use to verify them. Every quotation is verbatim; the status badge describes the document, not our certification scope.

EU safety legislation

Directive 2014/35/EU (Low Voltage Directive), Article 1

European Commission / EUR-Lex

Official reference (document status, not our certification scope)

Buyer use: Check the safety objective for electrical equipment placed on the EU market and the voltage range the Directive covers.

“The purpose of this Directive is to ensure that electrical equipment on the market fulfils the requirements providing for a high level of protection of health and safety of persons, and of domestic animals and property, while guaranteeing the functioning of the internal market.”

— European Commission / EUR-Lex, Article 1 — Subject matter and scope, official source ↗

“This Directive shall apply to electrical equipment designed for use with a voltage rating of between 50 and 1 000 V for alternating current and between 75 and 1 500 V for direct current, other than the equipment and phenomena listed in Annex II.”

— European Commission / EUR-Lex, Article 1 — Subject matter and scope, official source ↗

Edition / status: Original act as published in the Official Journal; the EUR-Lex page does not display a consolidated-version status field.

EU substance restrictions

Directive 2011/65/EU (RoHS), consolidated text 01/02/2024

European Commission / EUR-Lex

Official reference (document status, not our certification scope)

Buyer use: Check how the Directive defines "cables" and what the Article 4(1) substance restriction means when requesting material compliance documents.

“Member States shall ensure that EEE placed on the market, including cables and spare parts for its repair, its reuse, updating of its functionalities or upgrading of its capacity, does not contain the substances listed in Annex II.”

— European Commission / EUR-Lex, Article 4(1) — Prevention, official source ↗

“‘cables’ means all cables with a rated voltage of less than 250 volts that serve as a connection or an extension to connect EEE to the electrical outlet or to connect two or more EEE to each other;”

— European Commission / EUR-Lex, Article 3(5) — Definitions, official source ↗

Edition / status: EUR-Lex consolidated text dated 01/02/2024. The page also links to a later consolidated version; verify the current text before relying on it.

EU construction products

Regulation (EU) No 305/2011 (Construction Products Regulation)

European Commission / EUR-Lex

In force (document status, not our certification scope)

Buyer use: Check how the performance of construction products must be expressed and where CE marking applies — relevant to cables permanently installed in buildings.

“The rules of Member States require that construction works be designed and executed so as not to endanger the safety of persons, domestic animals or property nor damage the environment.”

— European Commission / EUR-Lex, Recital (1), official source ↗

“This Regulation lays down conditions for the placing or making available on the market of construction products by establishing harmonised rules on how to express the performance of construction products in relation to their essential characteristics and on the use of CE marking on those products.”

— European Commission / EUR-Lex, Article 1 — Subject matter, official source ↗

Edition / status: EUR-Lex shows a current consolidated version dated 29/05/2026. The quotations below are from the original act.

International product standard

IEC 60502-1:2021, Edition 3.0, TC 20 (publication 64963)

International Electrotechnical Commission (IEC)

Official reference (document status, not our certification scope)

Buyer use: Check the official scope of the 1 kV / 3 kV extruded-insulation power cable standard when comparing our published construction, dimensions and test requirements.

“IEC 60502-1:2021 specifies the construction, dimensions and test requirements of power cables with extruded solid insulation for rated AC voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) for fixed installations such as distribution networks or industrial installations.”

— International Electrotechnical Commission (IEC), Publication abstract, official source ↗

Edition / status: Current IEC catalogue entry, published 2021-02-09, stability date 2030.

Customs classification

Harmonized System 2017, heading 8544 and six-digit subheadings

United Nations Statistics Division (UNSD)

Official classification data (document status, not our certification scope)

Buyer use: Check the six-digit international heading for insulated wire and cable when preparing customs declarations or comparing trade statistics.

“8544 - Insulated wire, cable and other electric conductors, connector fitted or not; optical fibre cables of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors”

— United Nations Statistics Division (UNSD), 4-digit heading, official source ↗

Edition / status: UNSD classification page for HS 2017. National tariff schedules add further digits and set duty rates.

Quality management standard status

ISO 9001:2015 — Quality management systems — Requirements, standard 62085

International Organization for Standardization (ISO)

Withdrawn edition (document status, not our certification scope)

Buyer use: Check the edition status behind a quality-management certificate and what the issuing body says about transition to the new edition.

“Organizations certified to ISO 9001:2015 should consult their certification body regarding transition arrangements to the new edition.”

— International Organization for Standardization (ISO), ISO standard page, edition status, official source ↗

Edition / status: The ISO page marks the 2015 edition withdrawn (stage 95.99, 2026-09-16) and replaced by ISO 9001:2026. Our certificate is still listed exactly as printed; transition arrangements are for the issuing certification body to confirm.

Note on editions: our ISO 9001 certificate is listed exactly as printed on the certificate (ISO 9001:2015 / GB/T 19001-2016, valid through 2027-10-30). The ISO page linked above states that the 2015 edition has been replaced by ISO 9001:2026; certificate transition arrangements should be confirmed with the issuing certification body.

Sources and quotations last verified 2026-11-10. A 403 response from an official site is bot protection, not a dead link.